Protection solutions for commercial or residential applications, resistant to blast debris of any kind

Blast Debris Barriers

Select door protection method:

Protection solutions for commercial or residential applications, resistant to blast debris of any kind

Wall or hallway coverings for blast debris protection.

Designed for industrial environments or test purposes, to provide protection to occupants or equipment from exploding fragment dangers.

  • Available as certified to UL752 Level 3 or Level 2 protection.
  • Completely customizable for size and shape, up to 96 in. x 96 in., some larger sizes can be accommodated in certain circumstances.
  • Cover materials can be customized for additional protection, water-proofing, or chemical resistance.
  • Options for motorized deployment and retraction.

Protection solutions for commercial or residential applications, resistant to blast debris of any kind

PART

BBP752-Level 3-BX and BBP752-Level 2-BX

See Installation Instructions
US Patent
11,585,640 B1
12,078,456 B1

How it works

Bullet-resistant protection that deploys and retracts similar to conventional window shades

  • Shades deploy from above the window frame either by manual hand crank or a motorized system.
  • The motor can be activated with a standard wall switch, wireless remote control, or by connecting to an existing alarm system.
  • The all-fabric shielding benefits from the patented BBP "energy dissipation solution" that allows the shield to act as though it is catching the bullet rather than simply resisting its impact only with brute strength.  
    This significantly reduces the stress on the entire system, including the mountings to the walls and framing.
  • For added stability on smaller windows/doors, outdoor use, and recommended applications, two types of retention devices can secure the bottom of the fabric:
  • Cable Guide: As the shield lowers into positions, the hem bar rides along cables attached to the side of the window, providing added resistance to movement as bullets impact.
  • Locking Hem Bar: When lowered into position, the hem bar locks into mounts that sit below the window, holding the bottom of the shade securely into place as the bullets impact.

Installation Customization Available

In ceiling
Soffit integration
Outside window frame
With a secondary cosmetic shade
How our bulletproof door shields work

How it works

Bullet-resistant protection that deploys and retracts similar to conventional shade over a window

  • Door shields deploy from above the door frame either by manual hand crank or a motorized system.
  • The motor can be activated with a standard wall switch, wireless remote control, or by connecting to an existing alarm system.
  • The all-fabric shielding benefits from the patented BBP "energy dissipation solution" that allows the shield to act as though it is catching the bullet rather than simply resisting its impact only with brute strength.  
    This significantly reduces the stress on the entire system, including the mountings to the walls and framing.
  • For added stability on smaller doors, outdoor use, and recommended applications, cable guided retention can secure the bottom of the fabric in place. As the shield lowers into positions, the hem bar rides along cables attached to the side of the door, providing added resistance to movement as bullets impact.

Installation Customization Available

In ceiling
Soffit integration
Outside door frame

Size and Weight Parameters

Drive Options

Bulletproof protection drive options

Enclosure Options

Bulletproof protection fascia options

Mounting

  • Must mount to structural support material/studs (wall anchors in drywall are not permissible).
  • ICC-ES-2236 , ISO14585 screws (or similar standard) required.
  • Roll good brackets mounts with four screws per bracket side:
  • Wood studs:  ¼” timber screws, 3” length.
  • Wood studs:  ¼” timber screws, 3” length.
  • Steel Studs: #14 self-tapping screws, 1½” length.
  • Masonry, brick, concrete:  ¼” anchor screws, 2¾” length.
Bulletproof window shade wall bracket
Dimensions shown are typical and may vary depending on configuration choices.
Bulletproof window shade mounting detail
  • Must mount to structural support material/studs (wall anchors in drywall are not permissible).
  • ICC-ES-2236 , ISO14585 screws (or similar standard) required.
  • Grommet and Pocket brackets mounts with two screws per bracket side:
  • Wood studs:  ¼” timber screws, 3” length.
  • Steel Studs: #14 self-tapping screws, 1½” length.
  • Masonry, brick, concrete:  ¼” anchor screws, 2¾” length.

Contact us for more information

If you're interested in purchasing our products or for more information on them, send us a message. We'll get back to you as soon as possible.

Your message has been sent.
We will get back to you within 24-48 hours.
Oops! Sorry. Something went wrong while submitting the form.
Please try again.